How To Clean Pool Bottom: No Vacuum

How to clean the bottom of the pool that is full of algae without a vacuum cleaner

Having a swimming pool at home can be one of the greatest pleasures in life, it gives you the possibility to have fun, spend time with your family or friends, swim, and even exercise.

Having a pool offers you endless possibilities that will make your life more enjoyable.

But it also comes with great responsibility, you must make sure to keep your pool in perfect condition and completely clean. In this way, you will avoid a lot of diseases that can be caused by the poor hygiene of a pool.

How To Clean Pool Bottom: Algae can be a huge problem

How To Clean Pool Bottom Algae can be a huge problem

The main problem that you must fight is the algae that appear on the bottom, the walls, and even that you can see on the surface of the water of your pool.

Algae are unicellular plants that grow in the water when the optimal conditions for their growth and proliferation are present. They get into the water through the air, from people coming in and out, and even from rain and other factors.

After their appearance, algae usually cloud the pool water, giving it a characteristic green or brownish hue.

By themselves, they are not harmful to those who use the pool, but their presence facilitates the appearance of bacteria and other organisms that can be harmful to health.

To enjoy clean and crystal clear water, you should try to keep the pool free of algae. And although it may be easier to prevent their appearance, once they appear, the ideal is to get rid of them as soon as possible.

No vacuum No problem

Cleaning the bottom of the pool is not the easiest task, especially if you don’t have a vacuum cleaner or a robotic pool cleaner to do the job for you.

The real question is how to clean the bottom of the pool with algae with no vacuum cleaner?

Don’t worry, below we show you several alternatives to clean the bottom of your pool without using a vacuum cleaner, which will allow you to leave it as good as new and ensure that it remains in perfect condition.

Clean The Pool With Chemicals

Add chemicals to get rid of Algae

It is worth starting the fight against algae as soon as you recognize the first symptoms. Then it will be a less complicated activity.

There are hundreds of different products on the market, and choosing the right ones is a real challenge, especially for those who perform this activity for the first time.

Preparations ensure an adequate level of nitrates and phosphates

In the market, you can find a great variety of products destined for these tasks with an adequate level of nitrates and phosphates.

The ideal is to check the instructions before using any product because in most cases, there are special recommendations about what chemicals you can or cannot add to the water.

Usually, less than 0.2 ppm is recommended for phosphate concentration and less than 20 ppm for nitrate concentration.

However, each manufacturer may have its particular recommendations.

Use Algaecides To Clean The Pool

Try algaecides for an algae outbreak

Algaecides are special chemicals whose main function is to eradicate algae from the pool. We can use them after reaching the optimum concentration of nitrates and phosphates in the water.

In the past, mercury and copper salts were used for this purpose. However, it turned out that these substances were harmful to your health and they were replaced by safe algaecides.

Since we already know what will work best to clean the pool of algae, there are two things to keep in mind.

  • First: The use of the above preparations is recommended during the season when we use the pool the most, that is, mainly in the summer. When temperatures are very low, it is recommended to wait until the end of the season to clean the pool again.
  • Secondly: Before using the products, read the instructions that come with the package. Special attention should be paid mainly to the dosage and application. This will ensure proper and safe use of the product.

It should be remembered that algaecides are only part of a wide range of pool chemicals. The market also offers several products that can be used for:

  • Clarifying the pool water
  • Raising and lowering the pH of the water
  • Remove grease stains
  • Disinfect
  • Eliminate bacteria

Some experts also suggest other methods, such as:

Cleaning The Pool With Chlorine.

Cleaning The Pool With Chlorine.

It is mainly used for the treatment of pool water. It can be purchased either as a liquid, tablets, or granules. The solution you choose depends on your needs and preferences.

However, chlorination alone is not enough. After a while, algae become resistant to its effects. In such a case, the preparations mentioned above should be used.

It is recommended that the pH level of the water be between 7.2 and 7.4 because if it is not adequate, the chlorine can lose approximately 40% of its effectiveness. To neutralize these levels, you can add sodium bisulfate, leaving it to act for 2 hours without anyone using the pool.

Clean The Pool With Vitamin C.

Clean The Pool With Vitamin C

Using ascorbic acid has become very popular as of late, because it is an alternative to chlorine. A lot of people have switched to ascorbic acid or vitamin C because they do not like the smell of chlorine from the pool. Chlorine can also irritate the skin and eyes.

This method provides virtually instant results. After only a few minutes of applying ascorbic acid, the water becomes clear and transparent.

However, remember that this vitamin has no algacidal or disinfecting effects (like chlorine). Currently, its use is very popular but NOT advisable.

Remember that before using any chemical product you should:

  • Remove impurities.
  • Clean the surface walls with a soft cloth. (microfiber, cotton, chamois), which does not release residues that can clog the drain of the pool.

How To Clean Pool Bottom With A Nylon Bristle Brush

How To Clean Pool Bottom With A Nylon Bristle Brush

To keep the bottom of your pool clean without a vacuum cleaner, one of the options is to do it manually, brushing the bottom with a nylon brush, sweeping the remains of dirt, debris, or sand, and removing everything with a dustpan little by little.

Plants that may be near the pool can also shed leaves and flowers that tend to dirty the pools. These residues can be removed and cleaned with a rake used for cleaning the lawn.

A tip for you to remove this debris simply after cleaning a pool is to pile them in a corner where they can be easily removed with your hands.

Remember that the main reasons why algae usually appear in the pool area are because there is an imbalance in the water or that the pool is not properly cleaned to prevent their appearance.

For brush cleaning, it is necessary to accompany the process with chemicals and work as follows:

  • The first thing you need to do is to protect yourself with glasses, gloves, and appropriate clothing.
  • To start this pool cleaning treatment, check the pH level of the water because if it is high, algae will be produced.
  • Use a phosphate remover to get rid of algae, especially if they appear very frequently.
  • Brush the floor and especially the walls of the pool very well, because algae tend to lodge mainly in this area.
  • If the brush is not made of nylon, make sure it is made of a material that does not damage these areas of the pool.
  • Increase the hours of filtration of the pool.
  • Clean the dead algae and remove them.

Use A Pool Cover

Use A Pool Cover

An excellent way to keep the floor cleaner for longer, and the entire pool in general, is to use a pool cover when you are not using it. That way, you can limit the amount of debris that can fall into the pool.

However, before removing the cover, don’t forget to remove any debris that has accumulated on the cover to prevent it from falling into the pool when you uncover it.

It is also recommended that you add small doses of pool algaecide every week to prevent algae growth. Follow the manufacturer’s instructions for using the proper amounts of this product.

To prevent algae growth, also make sure that the water in your pool has proper circulation. Proper circulation of the water helps prevent water stagnation, which is ideal for algae growth.

Conclusion: Have Fun Swimming

Conclusion  Have Fun Swimming

Regardless of which algae cleaning technique you choose, before proceeding to remove algae, it pays to familiarize yourself with the instruction manual or the manufacturer’s recommendations. Otherwise, we can deteriorate the pool by using the wrong tools and detergents.

Reading the instruction manual and complying with its provisions is the best way to preserve the high durability and service life of the pool.

In summary, removing algae is an extremely important step if you want to keep your pool water crystal clear.

If you don’t have a pool vacuum or a robotic pool cleaner, you can clean the bottom of your pool manually or by using chemicals to make the job easier. But remember to always protect yourself and do the job with caution.

It is important to emphasize that preventing the appearance of algae is a simpler job than eliminating them. However, after their appearance, you will have to get down to work.

Leave a Comment