How To Clean A Green Pool Fast!

Have you recently uncovered your pool, only to discover that it has taken on an embarrassingly emerald hue? Don’t worry; there are only a few simple steps required to restore the blue color to your pool. You will learn the method of how to clean a green pool fast and how to properly maintain the pool so that it does not turn green again.

Nobody likes to swim in a pool that’s been stained green! However, why is the water in your pool green? You guessed correctly if you thought it was algae. The color of the water may become green due to the growth of algae if the chlorine levels are too low. You might even get tadpoles and even frogs if you leave it alone for a long enough period of time. Yuck!

How To Clean A Green Pool Fast!

Cleaning a green pool fast

To your relief, there are steps you can take to restore that gorgeous blue color to your pool. Cleaning your pool only requires a few basic supplies when using this method.

  • FAS-DPD test kit
  • Skimmer pole, net, pool, vacuum
  • Muriatic acid
  • Soda ash
  • Shock treatment (chlorine)
  • Cyanuric acid
  • Protective gear

Remove Larger Items Of Debris

Remove Larger Items of Debris

You want to swim in water that is as free of contaminants as you can possibly make it. Therefore, the first thing you should do is get rid of any organic material.

  • Make a quick pass over the surface with the net.
  • Scrub the floor as well as the walls of the pool.
  • You can collect the organic material that you kicked up by using the net.
  • When all of the large items have been removed, you can vacuum collect any organic matter that may still be present.

Water Chemistry Test

Water Chemistry Test

After all of the debris has been removed from the water, the next step is to conduct a chemistry test on it. You will want to pay particular attention to the free chlorine, the pH level, and the cyanuric acid (CYA).

  • Conduct chemical analysis of the water.
  • The pH level ought to be somewhere in the range of 7.5 and 7.8.
  • The CYA concentration ought to be between 30 and 60 ppm.
  • The level of free chlorine must be between 1 and 5 parts per million.
  • To restore the equilibrium in your chemistry, use the appropriate chemicals, such as muriatic acid, soda ash, cyanuric acid, and so on.

Using any pool chemistry calculator you calculate the best dosages to rebalance your pool. Additionally, when using chemicals you should make use of protective gloves and goggles.

Shock Your Pool

Shock Your Pool

In order to eliminate the algae in your pool, it is time to administer a substantial amount of chlorine. It was essential to conduct the chemistry test because the CYA level is what use to calculate the amount of chlorine that needs to be added to your pool. This is something that can be accomplished using a pool calculator. When you shock the pool, for instance, you need to get the free chlorine level up to 24. This is the case even if your CYA was 60. Follow these steps once you have determined how much more to add.

  • Add the shock chemicals to the pool using the recommended dosages.
  • Turn on the pump to run for 24 hours.
  • Test the pool repeatedly every few hours.
  • Add extra shock doses as required to maintain your shock level.
  • As your shock levels stabilize, check the water less often.

Because of the high levels of chlorine that will be present in the water while you are using the SLAM method, you should avoid getting into your pool during this time.

Important – Clean Filter

Maintaining a clean filter to take out the algae it has removed from the pool requires regular cleaning. Cleaning your filter will ensure that it is operating at peak performance, allowing it to remove all of the algae and grime from your water. It is recommended that you keep your filter operating nonstop for the first twenty-four hours of the process; however, it is in your best interest to leave it operating the entire time.

Scrub and Vacuum Pool

Scrub and Vacuum Pool

You’ll notice that your pool is getting cloudy as the process starts to get into high gear and work for you. Maintain the cleanliness of your filter. In order to remove the dead algae, you should start by vacuuming the area and then scrubbing it.

  • You can get rid of chunks and sweep the sides by using the pool skimmer and brush.
  • To remove any debris that may have settled to the bottom of the pool, vacuum it out.
  • Maintaining the pool’s clarity will require you to continue keeping the filter clean, and vacuuming.

Carry Out The Chlorine Loss Check

After your pool has reached that gorgeous, crystal-clear blue color, you should conduct the chlorine loss reading

  • At dusk, conduct the test to determine the level of free chlorine.
  • Perform the test once more at dawn.
  • In order to pass the test, the free chlorine level must not fall below 1 ppm. In addition, the total amount of chlorine in your water should be lower than 0.5.
  • If it fell by more than I just stated you need to continue the process by testing it again the following day.

How Long Before You Lose The Green Color?

How Long Before You Lose the Green Color?

You should start to notice a difference within the first twenty-four hours of starting to clean your green pool. Provided you caught it soon enough it may be ready to swim within a day or two. However, the amount of time it takes before the pool is completely free of algae can range anywhere from four to five days.

Avoid Green Water In The Future

You don’t want to repeat that process now that you’ve restored the original color of the water in your pool. It is a lengthy and laborious process that involves shocking and testing the pool. There are some tasks you should do to maintain the cleanliness and freshness of your pool.

  • You should vacuum your pool once a week.
  • Make sure the walls of your pool are clean.
  • You should swim in your pool on a regular basis to maintain the water moving.
  • Perform weekly checks on the levels of pH, free chlorine, and CYA.
  • If necessary, add in some chemicals.
  • Maintaining the skimmer requires regular cleaning.
  • Make sure to check the filter as well as the backwash as necessary.
  • Maintain your filter’s operation for at least ten to twelve hours each day.

Conclusion On How You Clean A Green Pool Fast.

Conclusion on How you clean a green pool fast

If your pool turns green make sure you work fast to prevent a complete algae bloom. If you get to it soon enough you can have your pool clean in a day or two. Now that you got it clean, stay on a maintenance schedule to keep you water nice and clear.

Enjoy the swimming season and stay safe.

Leave a Comment